|
Picnic Table Assembly Instructions
Step 1
Place Table top face down on the floor. Loosely assemble 'A' frame and seat sections by inserting bolt through the pre-drilled hole and then fit washer and hand tighten nut. When all sections are assembled fully tighten all nuts with a spanner (not supplied).
Step 2
Position brace piece in line with the pre-drilled hole on the table underbearer. Drill pilot hole and insert and tighten screw.
Step 3
Press down firmly on ledge piece and drill pilot holes and insert and tighten screws.
Step 4
Drill pilot hole and insert and tighten screw.
 |
